Human IgG antibody Laboratories manufactures the test screening virus sars -cov2 a lecco reagents distributed by Genprice. The Test Screening Virus Sars -Cov2 A Lecco reagent is RUO (Research Use Only) to test human serum or cell culture lab samples. To purchase these products, for the MSDS, Data Sheet, protocol, storage conditions/temperature or for the concentration, please contact SARS Test. Other Test products are available in stock. Specificity: Test Category: Screening Group: Virus Sars
Human anti-SARS-CoV2 (S) IgG ELISA Kit |
|
MyBiosource |
10x96-Strip-Wells |
EUR 3900 |
Human anti-SARS-CoV2 (S) IgG ELISA Kit |
|
MyBiosource |
48-Strip-Wells |
EUR 340 |
Human anti-SARS-CoV2 (S) IgG ELISA Kit |
|
MyBiosource |
5x96-Strip-Wells |
EUR 2045 |
Human anti-SARS-CoV2 (S) IgG ELISA Kit |
|
MyBiosource |
96-Strip-Wells |
EUR 455 |
SARS-CoV2-N Antibody |
|
EnoGene |
N/A |
EUR 276.5 |
|
Description: N/A |
SARS-CoV2-N Antibody |
|
EnoGene |
N/A |
EUR 276.5 |
|
Description: N/A |
SARS-Cov2-NP3 Antibody |
|
EnoGene |
N/A |
EUR 276.5 |
|
Description: N/A |
Virus Sars information
Mikrogen Diagnostik recomLine TORCH Screening IgG Lateral Strip Test Kit |
|
6472 |
Genovis AB |
20 Tests |
EUR 425 |
Mikrogen Diagnostik recomLine TORCH Screening IgM Lateral Strip Test Kit |
|
6473 |
Genovis AB |
20 Tests |
EUR 425 |
HPV (Type 1, 6, 11, 16, 18, 31) Human Papilloma virus (Screening Antibody) |
|
MBS397239-3mL |
MyBiosource |
3mL |
EUR 560 |
HPV (Type 1, 6, 11, 16, 18, 31) Human Papilloma virus (Screening Antibody) |
|
MBS397239-5x3mL |
MyBiosource |
5x3mL |
EUR 2370 |
SARS-CoV-1 Spike Trimer (S1+S2):ACE2 Inhibitor Screening Colorimetric Assay Kit |
|
78012 |
BPS Bioscience |
96 rxns. |
EUR 765 |
|
Description: Severe acute respiratory syndrome (SARS) is a viral respiratory illness caused by a corona virus called SARS-CoV-1. It was first reported in February 2013 in Asia and the epidemic affected ~ 26 countries and resulted in more than 8000 deaths. Like SARS-CoV-2, SARS-CoV-1 Spike protein recognizes and attaches to the Angiotensin-Converting Enzyme 2 (ACE2) receptor found on the surface of type I and II pneumocytes, endothelial cells, and ciliated bronchial epithelial cells. Drugs targeting the interaction between the Spike protein of SARS-CoV-1 and ACE2 may offer some protection against the viral infection. The SARS-CoV-1 Spike Trimer (S1+S2):ACE2 Inhibitor Screening Assay Kit includes the SARS-CoV-1 Spike protein in its native trimeric conformation to provide a more physiologically relevant screen for inhibitors as well as a compatible platform to investigate the specificity of SARS-CoV-2:ACE2 inhibitors._x000D_ The key to this kit is that the SARS-CoV-1 Spike Trimer (S1+S2) protein provides a more biologically relevant model than monomeric Spike RBD protein for the investigation of SARS-CoV-1/host cell interaction. Only a few simple steps on a microtiter plate are required for the assay. First, SARS-CoV-1 Spike Trimer (S1+S2) is coated on a 96-well plate. Next, Biotin-ACE2 is incubated with SARS-CoV-1 Spike Trimer (S1+S2) on the plate. Finally, the plate is treated with Streptavidin-HRP followed by addition of a colorimetric HRP substrate to produce color, which then can be quenched and measured using a UV/Vis microplate reader. |
SARS-CoV-2 Spike Trimer (S1+S2):ACE2 Inhibitor Screening Colorimetric Assay Kit |
|
79999 |
BPS Bioscience |
96 rxns. |
EUR 865 |
|
Description: The pandemic coronavirus disease 2019 (COVID-19) is caused by Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2). The Spike glycoprotein is expressed on the surface of the virus as a trimer. Each Spike protein consists of two subunits, S1 and S2, and the S1 subunit has a receptor binding domain (RBD) which recognizes and attaches to the Angiotensin-Converting Enzyme 2 (ACE2) receptor found on the surface of type I and II pneumocytes, endothelial cells, and ciliated bronchial epithelial cells. Drugs targeting the interaction between the Spike protein of SARS-CoV-2 and ACE2 may offer some protection against the viral infection. The SARS-CoV-2 Spike Trimer (S1+S2) :ACE2 Inhibitor Screening Assay Kit includes the Spike protein in its native trimeric conformation to provide a more physiologically relevant screen for inhibitors of the Spike S1:ACE2 interaction._x000D_The SARS-CoV-2 Spike Trimer (S1+S2) :ACE2 Inhibitor Screening Assay Kit is designed for screening and profiling inhibitors of this interaction. The key to this kit is that the SARS-CoV-2 Spike Trimer (S1+S2) protein provides a more biologically relevant model than monomeric Spike RBD protein for the investigation of SARS-CoV-2/host cell interaction. Only a few simple steps on a microtiter plate are required for the assay. First, SARS-CoV-2 Spike Trimer (S1+S2) is coated on a 96-well plate. Next, Biotin-ACE2 is incubated with SARS-CoV-2 Spike Trimer (S1+S2) on the plate. Finally, the plate is treated with Streptavidin-HRP followed by addition of a colorimetric HRP substrate to produce color, which then can be quenched and measured using a UV/Vis microplate reader. |
Spike S1 (B.1.1.7 Variant) (SARS-CoV-2): ACE2 Inhibitor Screening Colorimetric Assay Kit |
|
78155 |
BPS Bioscience |
96 rxns. |
EUR 995 |
|
Description: The Spike S1 (B.1.1.7 Variant) (SARS-CoV-2):ACE2 Inhibitor Screening Colorimetric Assay Kit is designed for screening and profiling inhibitors of the interaction of ACE2 with the B.1.1.7 variant of the SARS-CoV-2 Spike S1 protein. The key to this kit is the high sensitivity of detection of ACE2-Biotin protein by Streptavidin-HRP. Only a few simple steps on a microtiter plate are required for the assay. First, Spike S1 B.1.1.7 protein is coated on a 96-well transparent plate. Next, ACE2-Biotin is incubated with Spike S1 variant on the plate. Finally, the plate is treated with streptavidin-HRP followed by addition of an HRP substrate to produce color, which can then be measured using a UV/Vis spectrophotometer microplate reader. |
Spike S1 RBD (B.1.351 Variant) (SARS-CoV-2): ACE2 Inhibitor Screening Colorimetric Assay Kit |
|
78152 |
BPS Bioscience |
96 rxns. |
EUR 995 |
|
Description: The Spike S1 RBD-B.1.351 (SARS-CoV-2): ACE2 Inhibitor Screening Colorimetric Assay Kit is designed for screening and profiling inhibitors of the interaction of ACE2 with the RBD region of the B.1.351 Variant of the SARS-CoV-2 Spike S1 protein. |
Spike S1 (B.1.1.7 Variant) (SARS-CoV-2): ACE2 Inhibitor Screening Chemiluminescence Assay Kit |
|
78154 |
BPS Bioscience |
96 rxns. |
EUR 995 |
|
Description: The Spike S1 (B.1.1.7 Variant) (SARS-CoV-2): ACE2 Inhibitor Screening Chemiluminescence Assay Kit is designed for screening and profiling inhibitors of the interaction of ACE2 with the B.1.1.7 Variant of the SARS-CoV-2 Spike S1 protein. The key to this kit is the high sensitivity of detection of ACE2-Biotin protein by Streptavidin-HRP. Only a few simple steps on a microtiter plate are required for the assay. First, Spike S1 B.1.1.7 protein is coated on a 96-well transparent plate. Next, ACE2-Biotin is incubated with Spike S1 variant on the plate. Finally, the plate is treated with streptavidin-HRP followed by addition of an HRP substrate to produce chemiluminescence, which can then be measured using a luminometer or microplate reader capable of reding chemiluminescence. |
Lectin Screening Kit 2 - AP |
|
21511421-1 |
Bio-WORLD |
- |
EUR 421.88 |
Lectin Screening Kit 3 - AP |
|
21511423-1 |
Bio-WORLD |
- |
EUR 421.88 |
Lectin Screening Kit 1 - AP |
|
22110038-1 |
Bio-WORLD |
- |
EUR 325.3 |
Spike RBD (B.1.1.7 Variant) (N501Y) (SARS-CoV-2): ACE2 Inhibitor Screening Colorimetric Assay Kit |
|
78133 |
BPS Bioscience |
96 rxns. |
EUR 995 |
|
Description: The Spike RBD (SARS-CoV-2) UK variant (N501Y):ACE2 Inhibitor Screening Colorimetric Assay Kit is designed for screening and profiling inhibitors of the interaction of ACE2 with the UK variant (N501Y) of the SARS-CoV-2 Spike RBD protein. The key to this kit is the high sensitivity of detection of ACE2-Biotin protein by Streptavidin-HRP. Only a few simple steps on a microtiter plate are required for the assay. First, Spike RBD protein UK variant is coated on a 96-well transparent plate. Next, ACE2-Biotin is incubated with Spike RBD UK variant on the plate. Finally, the plate is treated with streptavidin-HRP followed by addition of an HRP substrate to produce color, which can then be measured using a UV/Vis spectrophotometer microplate reader. |
Lectin Screening Kit 3 - Cy5 |
|
21511322-1 |
Bio-WORLD |
- |
EUR 441.9 |
Lectin Screening Kit 1 - HRP |
|
21511418-1 |
Bio-WORLD |
- |
EUR 420.23 |
Lectin Screening Kit 2 - HRP |
|
21511420-1 |
Bio-WORLD |
- |
EUR 400.91 |
Lectin Screening Kit 3 - HRP |
|
21511422-1 |
Bio-WORLD |
- |
EUR 400.91 |